CeRam-Kote 60 Applications
CeRam-Kote 60 CeRam-Kote 60 / CeRam-Thane 200 System - Two-coat system is specifically engineered to provide atmospheric corrosion control where UV protection and cosmetics are important
CeRam-Kote 60 / CeRam-Thane 200 System - Two-coat system is specifically engineered to provide atmospheric corrosion control where UV protection and cosmetics are important. The system is not recommended for chemical immersion service. The CeRam-Kote 60 / CeRam-Thane 200 system can be matched to most colors. No primer is necessary when using the CeRam-Kote 60 / CeRam-Thane 200 system. CeRam-Kote 60 is applied directly to the properly prepared substrate in one pass followed by one pass of CeRam-Thane 200. Typically, this application can be completed in the same working day.
CERAM-KOTE 60/CERAM-THANE 200 SYSTEM
• Topcoat provides UV resistance and maximizes color retention
• Basecoat provides encapsulating ceramic shell protection
• No primer needed
• Each product requires only one coat
• Two-coat system saves time and labor
• System alleviates chalking and fading issues
• System can be color matched to most colors
• Spray applied for best results
