CeRam-Kote Support Products
CeRam-Thane 100 is a single component thin-film, spray-applied waterborne urethane engineered as a topcoat to provide ultraviolet light resistance and color fastness to almost all epoxy resins. CeRam-Thane 100 can be color matched for most colors. For use in a controlled environment.
- Provides ultraviolet light resistance
- Thin-film - 3-5 mils (75-125 microns) DFT
- Color fast
- Low Voc's - 1.00 lb/gal (120 g/l)
- Color matched to most colors (including existing CeRam-Kote colors)
- Easily brush or roller applied urethane
CeRam-Thane 100 Product Data Sheet
CeRam-Thane 100 Material Safety Data Sheet
CeRam-Thane 300 - is a heavy duty, high performance, two-component, exterior/interior, VOC compliant, high solids, polyester aliphatic urethane. Super tough, wet-look, high gloss finish with maximum gloss and color retention. Designed to withstand aggressive industrial environments and provide excellent durability against severe weather conditions, prolonged exterior exposure, abrasion, impact and general chemical attack.
CeRam-Thane 300 Product Data Sheet
CeRam-Thane 300 Material Safety Data Sheet
CeRam-Kote Organic Zinc Primer - is a high solids zinc rich epoxy primer for protection of structural steel in salt or weathering environments that will be topcoated with CeRam-Kote products. Not recommended for immersion service. The primer offers excellent adhesion and undercutting resistance. CeRam-Kote Organic Zinc Primer meets most VOC (Volatile Organic Compound) regulations. Available in green only.
CeRam-Kote Organic Zinc Primer Product Data Sheet
CeRam-Kote Organic Zinc Primer Material Safety Data Sheet
CeRam-Kote Thinner 1 - is an industrial grade thinner, recommended for use with CeRam-Kote epoxies. CeRam-Kote Thinner 1 is industrial grade MEK and is designed to optimize application/curing results with CeRam-Kote thin-film epoxy products.
CeRam-Kote Thinner 1 Product Data Sheet
CeRam-Kote Thinner 1 Material Safety Data Sheet
CeRam-Kote Thinner 3 - is an industrial grade thinner, recommended for use with CeRam-Kote epoxies. CeRam-Kote Thinner 3 is designed to optimize application/curing results with CeRam-Kote thin-film epoxies iwhen thinning is necessary. Preferred thinner for use in cold climates (60°F / 15.5°C and under).
CeRam-Kote Thinner 3 Product Data Sheet
CeRam-Kote Thinner 3 Material Safety Data Sheet
CeRam-Kote Thinner 4 - is an industrial grade thinner recommended for use with CeRam-Kote epoxies and urethanes. CeRam-Kote Thinner 4 is designed to optimize application/curing results with CeRam-Kote epoxies and urethanes. Preferred thinner for use in warmer climates, (i.e., above 80°F / 26°C).
CeRam-Kote Thinner 4 Product Data Sheet
CeRam-Kote Thinner 4 Material Safety Data Sheet
CeRam-Kote Thinner 5 - is an industrial grade thinner recommended for use with CeRam-Kote epoxies and urethanes. CeRam-Kote Thinner 5 is designed to optimize application/curing results with CeRam-Kote epoxies and urethanes. It is the recommended thinner for hot climates, (i.e., over 90°F / 32.2°C) and to help slow cure time slightly..
CeRam-Kote Thinner 5 Product Data Sheet
CeRam-Kote Thinner 5 Material Safety Data Sheet
