14.0 Miscellaneous

If the mixed coating sits for more than two hours, the ceramic solids in CeRam-Kote Ceramic Epoxy Coatings may settle out slightly. Shake or stir again. Shake one (1) quart or two (2) quart systems by hand to ensure suspension of solids if spraying is interrupted for more than an hour.

If coating is to be used in potable water, it is recommended to high-pressure water wash the finished, cured coating with an alkaline degreasing solution such as Devprep 88. After alkaline solution has been applied per manufacturers instructions, rinse surface with fresh water.